Installation Guide
A new installation guide video is now available for our next-generation (blue graphic) self-healing films!
Required tools:
- Hydrogel screen protector film
- Microfiber cloth
- Spatula, plastic card, or plastic scraper
- Screen cleaner or isopropyl alcohol (70% or more concentrated)
Steps for installing the hydrogel screen protector film:
Step: Preparing the workspace
Make sure you have a clean and well-lit workspace. Avoid dusty and damp environments as they can affect the success of the installation.
Step: Preparing the display
Turn off the device and ensure that the screen is clean and dry. If there are dust, fingerprints, or stains on the screen, use the screen cleaner or isopropyl alcohol to remove them. Soak the clean microfiber cloth in the cleaning solution and gently wipe the entire display to thoroughly clean it. Remember to let the display dry completely before moving on to the next step.
Step: Preparing the hydrogel screen protector film
If the hydrogel screen protector film is covered with a protective film on both sides, carefully remove the film from the back side. Avoid leaving fingerprints inside the film.
Step: Applying the hydrogel screen protector film
Place the hydrogel screen protector film on the device’s display.
Step: Positioning and aligning the film
Using the scraper (you can use a spatula, plastic card, or scraper), carefully place the hydrogel screen protector film on the device’s display. Start from the top and gradually adjust to the corners of the display. Accurate alignment is important to ensure that the film covers the entire display without air bubbles or excess overlap.
Step: Removing air bubbles
If air bubbles form during the application of the film, use the scraper (spatula, plastic card, or scraper) to press out the air and gently squeeze them out from under the film. Proceed slowly and carefully to avoid creating new bubbles or damaging the film.
Step: Refinement
Once the film is properly positioned and air bubbles are removed, go over the film with the scraper applying mild pressure to ensure perfect contact between the film and the display.
Step: Completion and removing the protective film
After successfully applying the film, let it rest for at least a few hours to fully adhere to the screen. If the film has an outer protective layer, carefully remove it.
Congratulations!
The hydrogel protector film is now properly applied to your device’s screen. Thoroughly check that the film adheres evenly, there are no air bubbles, and it aligns well. You can now safely use your device, with enhanced protection against scratches and fingerprints.
Video guide:
Frequently Asked Questions: Everything You Need to Know!
The hydrogel film is a new generation screen protector that is flexible and transparent, providing excellent protection for the phone screen.
While glass protectors can be hard and brittle, hydrogel films are flexible, allowing for quick repair of minor scratches.
Due to the flexibility of hydrogel films, their installation is simple and fast. In addition to the instructions included in the packaging, a detailed installation video is also available on our website.
The film withstands minor damage from everyday use for a long time. However, in case of severe damage such as deep scratches or cuts, the film needs to be replaced.
While hydrogel films provide excellent protection against scratches, they do not replace the impact protection against hard impacts that a case can provide.
